HPS Performance 57-1585-RED Dyno proven +6.2 horsepower, +7.3 torque,High Air Flow,Better Throttle Response

HPS Red 4-Ply Reinforced High Temp Silicone Post MAF Air Intake Hose replaces 2018-2019 Lexus GS300 2.0L Turbo stock OEM restrictive intake tube with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone intake tube increases the overall intake volume, improves air flow and reduces heat soak while keeping the stock well designed air box perform at high efficient level. HPS silicone tube primary section is constructed with 3.5 inch (89mm) inside diameter (stock is about 3-1/8 inch, 80mm) and gradually reduced to 60mm at the intake exit, this results in increased overall intake volume as well as smooth air flow. Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains of +6.2 Whp, +7.3 Ft/lbs, maintaining safe air/fuel ratio and smooth driviability. This silicone intake hose does NOT trigger check engine light. Installation time is approx. 30 minutes. No modification is required. This product fits Lexus 2018-2019 GS300 2.0L Turbo.

Specifications:

1882	Yes
2475	Stainless Steel
17	Red
Material	Silicone
1721	One Piece
2008	80
2009	60
3146	Round
3147	Round
1237	350
10469	No
3390	OEM Performance
3145	Specific
Prop 65 Yes/No	Yes
Prop 65 (C, R, or CR)	CR
Title	HPS Silicone Air Intake Kit 57-1585-RED Red
Prop 65 - Short Label	WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Description_SHO	Silicone Air Intake
Description_INV	HPS Silicone Air Intake
Description_ASC	Remark: Not CARB legal.
Description_KSW	HPS Performnace Silicone Air Intake Hose Kit with Clamps Horsepower Torque
Description_DES	Dyno proven +6.2 horsepower, +7.3 torque,High Air Flow,Better Throttle Response
Description_APS	Lexus: GS200t 16 - 17 2 L Turbo Engine Lexus: GS300 18 - 19 2 L Turbo Engine Lexus: IS200t 16 - 17 2 L Turbo Engine Lexus: IS300 18 - 24 2 L Turbo Engine Lexus: RC200t 16 - 17 2 L Turbo Engine
Description_APS	Lexus: RC300 18 - 24 2 L Turbo Engine
Description_EXT	Replace stock restrictive post MAF air intake hose with HPS Performance high temp 4-ply reinforced silicone tube. Includes stainless steel hose clamps and instruction manual. No heat soak. No modification is required. Retains stock air box.
Description_MKT	HPS Red 4-Ply Reinforced High Temp Silicone Post MAF Air Intake Hose replaces 2018-2019 Lexus GS300 2.0L Turbo stock OEM restrictive intake tube with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone intake tube increases the overall intake volume, improves air flow and reduces heat soak while keeping the stock well designed air box perform at high efficient level. HPS silicone tube primary section is constructed with 3.5 inch (89mm) inside diameter (stock is about 3-1/8 inch, 80mm) and gradually reduced to 60mm at the intake exit, this results in increased overall intake volume as well as smooth air flow. Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains of +6.2 Whp, +7.3 Ft/lbs, maintaining safe air/fuel ratio and smooth driviability. This silicone intake hose does NOT trigger check engine light. Installation time is approx. 30 minutes. No modification is required. This product fits Lexus 2018-2019 GS300 2.0L Turbo.
Description_FAB	Made of HPS Performance race proven high temperature reinforced silicone material.
Description_FAB	Replaces the stock OEM restrictive rubber intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level
Description_FAB	Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains +6.2 Whp, +7.3 Ft/lbs. Safe Air/Fuel ratio, smooth driviability.
Description_FAB	This silicone intake hose does not trigger check engine light
Description_FAB	installation time is approximately 30 minutes
Description_FAB	Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation.
Description_TLE	HPS Silicone Air Intake Kit 57-1585-RED Red
Description_DEF	Engine Air Intake Hose

This Part Fits:

Year	Make	Model	Submodel	Notes
2016	Lexus	GS200t
2017	Lexus	GS200t
2018	Lexus	GS300
2019	Lexus	GS300
2016	Lexus	IS200t
2017	Lexus	IS200t
2018	Lexus	IS300
2019	Lexus	IS300
2020	Lexus	IS300
2021	Lexus	IS300
2022	Lexus	IS300
2023	Lexus	IS300
2024	Lexus	IS300
2016	Lexus	RC200t
2017	Lexus	RC200t
2018	Lexus	RC300
2019	Lexus	RC300
2020	Lexus	RC300
2021	Lexus	RC300
2022	Lexus	RC300
2023	Lexus	RC300
2024	Lexus	RC300