HPS Performance 827-621BL Dyno proven +11 horsepower, +8.3 torque, Heat Shield, High Flow Air Filter

The HPS Performance Air Intake Kit is engineered to significantly boost your vehicle's performance. Dyno-proven results deliver gains of up to 11 horsepower and 8.3 lb-ft. of torque, along with a noticeable improvement in throttle response, all while maintaining a safe air-fuel ratio. This kit's design focuses on optimizing airflow as the mandrel-bent 3-1/2 inch aluminum intake tube and robust powder-coated steel heat shield replace the restrictive stock intake hose and air box. The heat shield is particularly effective, blocking hot air from reaching the air filter for superior cooling. Durability and reliability are paramount with this HPS kit. It features high-temperature resistant, 3-ply reinforced silicone hoses and industrial-grade 100% stainless steel T-bolt clamps, ensuring consistent performance even under extreme driving conditions. The included washable and reusable HPS Performance air filter not only increases intake air volume but also effectively traps particles as small as 5 microns, enhancing performance without compromising air quality. Installation is straightforward, with no modifications required, and the kit does not necessitate tuning nor will it trigger your CEL. A comprehensive installation manual with clear pictures and instructions is provided to guide you through the process.

Specifications:

10538	No
Universal Or Specific Fit	Specific
Prop 65 Yes/No	Yes
Prop 65 (C, R, or CR)	CR
Title	HPS Performance Air Intake Kit With Heat Shield 827-621BL Blue
Prop 65 - Short Label	WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
5745	Black
5746	Silicone
10461	Powder Coated
Tube Outside Diameter	3.5
368	Aluminum
4255	Blue
525	Cotton Gauze
3801	White
Air Filter Part Number	HPS-4298
8611	Yes
10468	Open
9577	Steel
10467	Textured
10463	Black
8020	T-Bolt
8020	Worm Gear
8022	Stainless Steel
30	Yes
Description_SHO	Air Intake Kit
Description_INV	HPS Air Intake Kit
Description_ASC	Remark: Not CARB legal.
Description_KSW	HPS Performance Air Intake Aluminum Tube High Flow Air Filter Horsepower Torque
Description_DES	Dyno proven +11 horsepower, +8.3 torque, Heat Shield, High Flow Air Filter
Description_APS	Honda: Passport 19 - 25 3.5 L Engine Honda: Pilot 16 - 22 3.5 L Engine Honda: Ridgeline 17 - 25 3.5 L Engine
Description_EXT	Includes HPS Performance 3.5" aluminum pipe, high temp reinforced silicone hoses, heat shield, washable and reusable air filter, 100% stainless steel T-bolt clamps, mounting hardware and instruction manual. No modifications required.
Description_MKT	The HPS Performance Air Intake Kit is engineered to significantly boost your vehicle's performance. Dyno-proven results deliver gains of up to 11 horsepower and 8.3 lb-ft. of torque, along with a noticeable improvement in throttle response, all while maintaining a safe air-fuel ratio. This kit's design focuses on optimizing airflow as the mandrel-bent 3-1/2 inch aluminum intake tube and robust powder-coated steel heat shield replace the restrictive stock intake hose and air box. The heat shield is particularly effective, blocking hot air from reaching the air filter for superior cooling. Durability and reliability are paramount with this HPS kit. It features high-temperature resistant, 3-ply reinforced silicone hoses and industrial-grade 100% stainless steel T-bolt clamps, ensuring consistent performance even under extreme driving conditions. The included washable and reusable HPS Performance air filter not only increases intake air volume but also effectively traps particles as small as 5 microns, enhancing performance without compromising air quality. Installation is straightforward, with no modifications required, and the kit does not necessitate tuning nor will it trigger your CEL. A comprehensive installation manual with clear pictures and instructions is provided to guide you through the process.
Description_FAB	Delivers dyno proven performance gains of 11 horsepower, 8.3 lb-ft. of torque and improves throttle response.
Description_FAB	Does NOT require tuning after the install.
Description_FAB	Light weight 3-1/2 inch mandrel-bent aluminum intake tube and heat shield optimize air flow with excellent heat dissipation and long lasting durability.
Description_FAB	Features an HPS Performance high-temperature resistant, 3-ply reinforced silicone hose and 100% stainless steel T-bolt clamps.
Description_FAB	Includes high-flow HPS Performance air filter.
Description_FAB	Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect.
Description_FAB	Easy bolt-on installation without requiring any additional modifications.
Description_TLE	HPS Performance Air Intake Kit With Heat Shield 827-621BL Blue
Description_DEF	Engine Cold Air Intake

This Part Fits:

Year	Make	Model	Submodel	Notes
2019	Honda	Passport
2020	Honda	Passport
2021	Honda	Passport
2022	Honda	Passport
2023	Honda	Passport
2024	Honda	Passport
2025	Honda	Passport
2016	Honda	Pilot
2017	Honda	Pilot
2018	Honda	Pilot
2019	Honda	Pilot
2020	Honda	Pilot
2021	Honda	Pilot
2022	Honda	Pilot
2017	Honda	Ridgeline
2018	Honda	Ridgeline
2019	Honda	Ridgeline
2020	Honda	Ridgeline
2021	Honda	Ridgeline
2022	Honda	Ridgeline
2023	Honda	Ridgeline
2024	Honda	Ridgeline
2025	Honda	Ridgeline