HPS Performance 827-610R Dyno proven +4.9 horsepower, +3.4 torque, High Flow Performance Air Filter

HPS 4-Ply Reinforced High Temp Red Silicone Shortram Air Intake Kit with HPS Performance air filter replaces the S2000 AP2 2.2L F22 drive-by-wire stock OEM restrictive rubber intake hose with high temp reinforced silicon material and replace the OEM cone filter with the bigger HPS performance air filter. HPS performance silicone shortram air intake kit improves air flow and throttle response, minimize the amount of heat soak by retaining the stock fresh air scoop and sealed air box design. The included air velocity stack also smooth out the air flow and reduce the amount of turbulence. Without any re-tuning, the HPS silicone post MAF air intake tube with HPS performance air filter delivers dyno-proven performance gains - increase horsepower +4.9 Whp , torque +3.4 Ft/lbs. The intake kit also makes the S2K sound louder and more aggressive compare to the stock intake setup. This silicone intake kit does NOT trigger check engine light. Installation time is approx. 1.5 to 2 hours. Modification is required in order to fit the large HPS filter into the stock air box, which requires trimming the lid in the lower air intake box and removal of the internal snorkel in the upper air intake box. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2006-2009 Honda S2000 AP2 2.2L F22 drive-by-wire.

Specifications:

1882	Yes
2475	Stainless Steel
17	Red
Material	Silicone
1721	One Piece
2008	87
2009	70
3146	Round
3147	Round
1237	350
10469	No
3390	OEM Performance
3145	Specific
Prop 65 Yes/No	Yes
Prop 65 (C, R, or CR)	CR
Title	HPS Performance Silicone Air Intake Kit 827-610R Red
Prop 65 - Short Label	WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Description_SHO	Silicone Air Intake
Description_INV	HPS Silicone Air Intake
Description_ASC	Remark: Not CARB legal.
Description_KSW	HPS Performnace Silicone Air Intake Hose Kit with Clamps Horsepower Torque
Description_DES	Dyno proven +4.9 horsepower, +3.4 torque, High Flow Performance Air Filter
Description_EXT	Replace stock restrictive air intake hose with HPS Performance high temp 4-ply reinforced silicone tube. Includes stainless steel hose clamps and instruction manual. No heat soak. Retains stock air box.
Description_MKT	HPS 4-Ply Reinforced High Temp Red Silicone Shortram Air Intake Kit with HPS Performance air filter replaces the S2000 AP2 2.2L F22 drive-by-wire stock OEM restrictive rubber intake hose with high temp reinforced silicon material and replace the OEM cone filter with the bigger HPS performance air filter. HPS performance silicone shortram air intake kit improves air flow and throttle response, minimize the amount of heat soak by retaining the stock fresh air scoop and sealed air box design. The included air velocity stack also smooth out the air flow and reduce the amount of turbulence. Without any re-tuning, the HPS silicone post MAF air intake tube with HPS performance air filter delivers dyno-proven performance gains - increase horsepower +4.9 Whp , torque +3.4 Ft/lbs. The intake kit also makes the S2K sound louder and more aggressive compare to the stock intake setup. This silicone intake kit does NOT trigger check engine light. Installation time is approx. 1.5 to 2 hours. Modification is required in order to fit the large HPS filter into the stock air box, which requires trimming the lid in the lower air intake box and removal of the internal snorkel in the upper air intake box. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2006-2009 Honda S2000 AP2 2.2L F22 drive-by-wire.
Description_FAB	Replace stock rubber intake hose with high temp reinforced silicone, deliver dyno proven performance gains +4.9 Whp horsepower, +3.4 Ft/lbs torque. Re-tuning is NOT required.
Description_FAB	Does not trigger check engine light. Retain stock fresh air scoop and sealed box design, minimize the chance of heat soaked problem.
Description_FAB	Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter.
Description_FAB	The included installation manual has clear pictures and instructions to guide the installer throughout the whole process.
Description_FAB	Requires modification of the stock air box.
Description_TLE	HPS Performance Silicone Air Intake Kit 827-610R Red
Description_DEF	Engine Air Intake Hose

This Part Fits:

Year	Make	Model	Submodel	Notes
2006	Honda	S2000		AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire
2007	Honda	S2000		AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire
2008	Honda	S2000		AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire
2009	Honda	S2000		AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire,AP2 2.2L F22 drive-by-wire